ReadyMadeRC
XOAR PJP-N PRECISION MATCHED PAIR - 11X5
Please Note: Final balance check is suggested before flight due to external factors such as temperature, handling during transit may vary the balance of the propeller.,
Please do not back order. Xoar PJP-N Beechwood Electric Precision ...ReadyMadeRC
XOAR PJP-N PRECISION MATCHED PAIR - 10X5
Please Note: Final balance check is suggested before flight due to external factors such as temperature, handling during transit may vary the balance of the propeller.,
Xoar PJP-N Beechwood Electric Precision Pair is for model planes ...ReadyMadeRC
LCD BACPAC
| Model Number | ALCDB-001 |
| What’s Included | 1 LCD BacPac screen |
| NOTE | May require a firmware upgrade. NOT compatible with the HD HERO 960 camera. |
Restrictions:,
The LCD BacPac is a detachable LCD screen for your ...ReadyMadeRC
SKYLARK DIANMU OSD WITH RTH
Main Feature:1: Built in OSD, 2: Auto return home, 3: 5V/12V DCDC output for camera/transmitter, 4: GPSINS Stabilizer, 5: 50Hz controlloop, 6: 3 Axis Gyro,3 Axis Acc, 7: Compass/GPS, 8: Built in Barometer, 9: AAT Support, Sample video using the Dianmu OSD:,
The new generation of OSD with GPS/INS Easy / Simple ...ReadyMadeRC
HS-81
Motor Type:, 3 Pole, Bearing Type:, None, Speed (4.8V/6.0V):, 0.11 / 0.09 sec @ 60 deg., Torque oz./in. (4.8V/6.0V):, 36 / 42, Torque kg./cm. (4.8V/6.0V):, 2.6 / 3.0, Size in Inches:, 1.17 x 0.47 x 1.16, Size in Millimeters:, 29.72 x 11.94 x 29.46, Weight ounces:, 0.58, Weight grams:, 16.44,
A popular servo for smaller airplanes, heli’s, boats, cars and ...ReadyMadeRC
HS-785HB SAIL WINCH SERVO
Motor Type:, 3 Pole, Bearing Type:, Dual Ball Bearing, Speed (4.8V/6.0V):, 1.68 / 1.38, Torque oz./in. (4.8V/6.0V):, 153 / 183, Torque kg./cm. (4.8V/6.0V):, 11.0 / 13.2, Size in Inches:, 2.32 x 1.14 x 1.96, Size in Millimeters:, 58.93 x 28.96 x 49.78, Weight ounces:, 3.88, Weight grams:, 110,
The HS-785HB sail winch servo with its large drum wheel ...ReadyMadeRC
HS-65MG
Motor Type:, 3 Pole, Bearing Type:, Top Ball Bearing, Speed (4.8V/6.0V):, 0.14 / 0.11 sec @ 60 deg., Torque oz./in. (4.8V/6.0V):, 25 / 31, Torque kg./cm. (4.8V/6.0V):, 1.8 / 2.2, Size in Inches:, 0.92 x 0.45 x 0.94, Size in Millimeters:, 23.37 x 11.43 x 23.88, Weight ounces:, 0.44, Weight grams:, 12.47,
Considered one of the most powerful servos in the micro ...ReadyMadeRC
57" TRIPOD WITH CARRYING BAG
| Model number | TR60N |
| Maximum height | 57 inches |
| Leg diameter | 20 millimeters |
| Fold length | 22 inches |
| Weight | 2.2 pounds |
| Warranty | 1 year |
Head type:, 3-way fluid pan and tilt head, Leg section:3, What's in the Box:, TR60N tripod, carrying bag,
Product Features Your Ideal solution for holding antennas/long range boosters. ...ReadyMadeRC
FY-41AP-A AIRPLANE STABILIZER, AUTOPILOT, AND ON SCREEN DISPLAY
| FY-41AP firmware for fix-wing V1.22 | Download |
| FY module firmware upgrade software and manual | Download |
| The latest FY-DOS&41AP-SETTING software V1.11 for fix-wing | Download |
| FY-41AP manual for fix-wing | Read online |
| More FY-41AP related downloads | Click in |
| FY-41AP OSD display part firmware V1.22a | Download |
| FY module firmware upgrade software and manual | Download |
| Supported servo output | 50Hz refresh frequency |
| Recommended Transmitter | PCM or 2.4GHz with minimum 6 channels |
| FY-41AP Module Working Voltage | 5.3V@0.2A( Powered by Power Manager) |
| Air speed senor | 0 ~ 200KM/h |
| Power Manager | 35g(50×24×18mm) |
| Working Voltage Range | Power of battery 7~26V (2S ~ 6S) |
| Measuring current | 0~100A |
| Power for FY-41AP module | 5.3V@2A |
| Power for Video transmission system | 12V@2A |
| Operating Temperature | -10°C ~ 50°C |
Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer, 3 axis magnetometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:, - Extremely stable conventional flight pattern, > Related download for fix-wing :, Reminder from Feiyu-tech: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART1 is the interface connects to the data radio, PC computer serial port to do the firmware upgrade for FY-41AP control module.If you want to upgrade the firmware of FY-41AP OSD module,please, Integrated OSD Video Overlay System, FY-41AP overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more., Feiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART2 is the interface connects to the PC computer serial port to do the firmware upgrade for FY-41AP OSD module.If you want to upgrade the firmware of flight control part ,please, :, 1, Normal / Traditional fixed-wing planes;, Assistant Software System Require,
Introduction FY-41AP is an inertial attitude measurement instrument used for ...ReadyMadeRC
CURVED ADHESIVE MOUNTS
| Warranty | One Year |
| Model Number | AACRV-001 |
| Construction | polycarbonate |
| Adhesive | 3M VHB 4991 double-sided strips |
What’s Included:, 5 Curved, 3M Adhesive Mounts, Restrictions:, According to GoPro policy, sales of the GoPro cameras from this store are restricted to the United States only.,
These are the same mounts already included with most HERO ...ReadyMadeRC
HOBBYWING FLYFUN 6A BRUSHLESS SPEED CONTROL
| 1.1 Output | Continuous 6A, Burst 8A up to 10 Secs. |
| 1.2 Input Voltage | 2 cells lithium battery or 5-6 cells NiCd/NIMh battery. |
| 1.3 BEC | 0.8A / 5V (Linear mode). |
| 1.4 Max Speed | 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. |
| (BLM | BrushLess Motor) |
| 1.5 Size | 24mm (L) * 12mm (W) * 6mm (H). |
| 1.6 Weight | 6g. |
| 2.1 Safety Arming Feature | Regardless the throttle stick position, the motor will not spin after battery connected. |
| Brake Setting | brake enabled / brake disabled. |
| Battery Type | Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd). |
| Low Voltage Protection Mode(Cutoff Mode) | Gradually reduce the output power / Cutoff the output power. |
| Low Voltage Cutoff Protection Threshold (Cutoff Threshold) | low / medium / high. |
| Start Mode | normal / soft / very soft. |
| Timing | low / medium / high. |
| Reset | reset all the programmable items to their default settings. |
| 2.4 Full Protection Features | Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection. |
2.2 Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters., 2.3 Programmable Items:,
1 Specification 2 Features 3 Advantages 3.1 Military standard capacitor ...ReadyMadeRC
HOBBYWING FLYFUN 30A BRUSHLESS SPEED CONTROLLER
| 1.1 Output | Continuous 30A, Burst 40A up to 10 Secs. |
| 1.2 Input Voltage | 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery. |
| 1.3 BEC | 2A / 5V (Linear mode). |
| 1.4 Max Speed | 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. |
| (BLM | BrushLess Motor) |
| 1.5 Size | 45mm (L) * 24mm (W) * 11mm (H). |
| 1.6 Weight | 25g. |
| 2.1 Safety Arming Feature | Regardless the throttle stick position, the motor will not spin after battery connected. |
| Brake Setting | brake enabled / brake disabled. |
| Battery Type | Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd). |
| Low Voltage Protection Mode(Cutoff Mode) | Gradually reduce the output power / Cutoff the output power. |
| Low Voltage Cutoff Protection Threshold (Cutoff Threshold) | low / medium / high. |
| Start Mode | normal / soft / very soft. |
| Timing | low / medium / high. |
| Reset | reset all the programmable items to their default settings. |
| 2.4 Full Protection Features | Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection. |
2.2 Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters., 2.3 Programmable Items:,
1 Specification 2 Features 3 Advantages 3.1 Military standard capacitor ...ReadyMadeRC
HOBBYWING FLYFUN 18A BRUSHLESS SPEED CONTROLLER
| 1.1 Output | Continuous 18A, Burst 22A up to 10 Secs. |
| 1.2 Input Voltage | 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery. |
| 1.3 BEC | 2A / 5V (Linear mode). |
| 1.4 Max Speed | 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. |
| (BLM | BrushLess Motor) |
| 1.5 Size | 45mm (L) * 24mm (W) * 11mm (H). |
| 1.6 Weight | 19g. |
| 2.1 Safety Arming Feature | Regardless the throttle stick position, the motor will not spin after battery connected. |
| Brake Setting | brake enabled / brake disabled. |
| Battery Type | Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd). |
| Low Voltage Protection Mode(Cutoff Mode) | Gradually reduce the output power / Cutoff the output power. |
| Low Voltage Cutoff Protection Threshold (Cutoff Threshold) | low / medium / high. |
| Start Mode | normal / soft / very soft. |
| Timing | low / medium / high. |
| Reset | reset all the programmable items to their default settings. |
| 2.4 Full Protection Features | Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection. |
2.2 Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters., 2.3 Programmable Items:,
1 Specifications 2 Features 3 Advantages 3.1 Military standard capacitor ...